SNAX/XF and SNAX/APN Configuration and Management Manual

SNAX/XF Primary Lines
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
3-4
Primary Line Using an X.25 SVC
Primary Line Using an X.25 SVC
Figure 3-3 shows an example of a primary line using an X.25 SVC. The SCF
configuration, shown alongside, configures the X25AM SU object (representing an
SVC) and the SNAX/XF LINE, PU, and LU objects.
Figure 3-3. Primary Line Using an X.25 SVC
$SSCP
$SNAP3
NonStop System
SWAN Concentrator
X.25 Network
SNAX/XF
Line Handler
X25AM Line
Handler
X25AM Line ($X25B)
X25AM SCF Configuration
ADD SU $X25B.#SU1
, PROTOCOL QLLC
, DEVTYPE (58,20)
, RECSIZE 80
, PORT 1
SNAX/XF SCF Configuration
ADD LINE $SNAP3
, SWITCHED ON
ADD PU $SNAP3.#PU1
, ADDRESS %HCA
, MAXLUS 1
, TYPE (13,2)
, RECSIZE 256
, ASSOCIATESUBDEV $X25B.#SU1
, CALLVALIDATE BOTH
, CALLADDR 022222222
, CONNID “ABCD2222”
ADD LU $SNAP3.#LU1
, TYPE(14,2)
, PUNAME #PU1
, DEVTYPE “3278-2"
, RECSIZE 1920
, PROTOCOL CRT
, ADDRESS 1
START LINE $X25B, SUB ALL
START LINE $SNAP3, SUB ALL
$X25B
SU
PU
LU
SNA Peripheral Node
VST303.vsd