SNAX/XF and SNAX/APN Configuration and Management Manual

SNAX/XF Passthrough
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
5-4
Configuring SNAX/XF Passthrough

$SNAS1.#PLU3 is configured for static passthrough.
.
Figure 5-2. SNAX/XF Passthrough
Primary Line ($SNAP1)
HOSTAPL1 HOSTAPL2 HOSTAPL3
SNA Host
NonStop System
$SNAP1
$SSCP
SNA
Communication
Controller
$SNAS1
PU
LU LU
LU
NCP
VTAM
Secondary Line ($SNAS1)
SWAN
Concentrator
SNAX/XF SCF Configuration
ADD LINE $SNAS1
, STATION SECONDARY
, APPLID (HOSTAPL1,HOSTAPL2,HOSTAPL3)
ADD PU $SNAS1.#PPU1
, TYPE(13,2)
, RECSIZE 265
, MAXLUS 3
, ADDRESS %HC1
ADD LU $SNAS1.#PLU1
, ADDRESS 1
, TYPE(14,0)
, PUNAME #PPU1
, PROTOCOL SNALU
, PASSTHROUGH ON
ADD LU $SNAS1.#PLU2
, ADDRESS 2
, LIKE $SNAS1.#PLU1
, PASSTHROUGH ON
, ASSOCIATE $SNAP1.#RLU2
ADD LU $SNAS1.#PLU3
, ADDRESS 3
, LIKE $SNAS1.#PLU1
, PASSTHROUGH ON
, ASSOCIATE $SNAP1.#RLU3
, STATIC ON
ADD LINE $SNAP1
ADD PU $SNAP1.#RPU1
, TYPE(13,2)
, RECSIZE 265
, MAXLUS 3
, ADDRESS %HC0
ADD LU $SNAP1.#RLU1
, TYPE(14,2)
, PUNAME #RPU1
, DEVTYPE “3278-2"
, RECSIZE 1920
, PROTOCOL CRT
, ADDRESS 1
ADD LU $SNAP1.#RLU2
, LIKE $SNAP1.#RLU1
ADD LU $SNAP1.#RLU3
, LIKE $SNAP1.#RLU1
START LINE ($SNAP1,$SNAS1), SUB ALL
PU
LU LULU
#PPU1
#PLU1,#PLU2,#PLU3
#RPU1
#RLU1,#RLU2,#RLU3
VST502.vsd