SNAX/XF and SNAX/APN Configuration and Management Manual

SNAX/APN Advanced Program-to-Program
Communication (APPC)
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
6-10
OS/2
Also, in the user data field of incoming call, the CID value must match the SNAX/APN
PU CONNID value.
OS/2
If the partner node is an IBM PS/2 running OS/2, the CPNAME and SNANETID must
match the Partner Node Name and Partner Network ID (respectively) in the OS/2
Configure Connection definition.
CICS
If the partner LU is an IBM CICS
TM
application, the NETNAME in the DFHTCT
SYSTEM entry of the Terminal Control Table must match the SNAX/APN local
SNANAME.
Table 6-4. Correspondences Between NPSI and SNAX/APN Values
NPSI Value SNAX/APN Value
PU IDBLK PU PUIDBLK
PU IDNUM PU PUIDNUM
PU USRFIL2 PU CALLADDR