SNAX/XF and SNAX/APN Event Management Programming Manual

SNAX/XF Event Messages
SNAX/XF and SNAX/APN Event Management Programming Manual—426859-001
3-71
63: ZSX1-EVT-SW-LU-ERR
ZEMS-TKN-EMPHASIS
contains the value ZSPI-VAL-TRUE, indicating that this event is a critical event.
This token is described in the EMS Manual.
ZEMS-TKN-CONSOLE-PRINT
contains the value ZSPI-VAL-TRUE. This token is described in the EMS Manual.
ZSPI-TKN-MANAGER
is the name of the service-manager process (the SUBSYS object name), as described
in Section 3 of the SNAX/XF Management Programming Manual.
ZEMS-TKN-LDEVNUMBER
identifies the logical device number. This is the 32-bit equivalent of
ZEMS-TKN-LDEV.
ZEMS-TKN-XLDEVNAME
is the string equivalent of the logical device number.
ZEMS-TKN-LDEV
is a standard EMS token described in the EMS Manual.
ZSX1-TKN-CAUSE-CODE
contains a value indicating the reason for the error. Some possible values are as
follows:
Note. Although ZEMS-TKN-LDEV is included in the event message, you should use the
ZEMS-TKN-LDEVNUMBER and ZEMS-TKN-XLDEVNAME tokens when writing new programs
to run on D-series systems or later systems.
1 Indicates that a send ABCONN command failed.
21 Indicates that a send ADD PU request failed.
22 Indicates that an ADD PU request failed.
23 Indicates that a REQCONT command failed.
24 Indicates that a send CONTACT command failed.
25 Indicates that a CONTACT command failed.
26 Indicates that a send ACTPU command failed.
27 Indicates that an ACTPU command failed.
41 Indicates that the setup LU parameter failed.