SNAX/XF and SNAX/APN Event Management Programming Manual

SNAX/XF Event Messages
SNAX/XF and SNAX/APN Event Management Programming Manual—426859-001
3-72
63: ZSX1-EVT-SW-LU-ERR
ZSX1-TKN-LU-ADDR
is the LU address.
ZSX1-TKN-LU-SESS-STATE
indicates the SSCP-LU session state. This token is described in Section 4 of the
SNAX/XF Management Programming Manual.
ZSX1-TKN-LU-STATE
indicates the LU session state. This token is described in Section 4 of the SNAX/XF
Management Programming Manual.
ZSX1-TKN-LU-TYPE
indicates the LU session type. This token is described in Section 4 of the SNAX/XF
Management Programming Manual.
ZSX1-TKN-SW-STATE
indicates the switched LU state. This token is described in Section 4 of the SNAX/XF
Management Programming Manual.
ZSX1-TKN-ERRCODE
is a SNAX/XF error or a file-system error that indicates why the event occurred.
Some possible values are as follows:
Cause. An attempt to add or activate a switched floating LU failed. Possible causes for
this failure include:
•
An attempt to allocate buffer space failed.
•
Some other file-system error occurred.
42 Indicates that the send ACTLU failed.
43 Indicates that the ACTLU failed.
45 Indicates that the ADD LU command to the line handler failed.
31 Indicates that no buffer space is available.
201 Indicates that the path is down.
255 Indicates that the session ID is not available.
402 Indicates that the LU is not started.
410 A conflict occurred with the ZSX1-TKN-LU-REC-SIZE value assigned to
the LU.
1218 Indicates an invalid level-6 protocol.
1219 Indicates an invalid level-5 protocol.