SNAX/XF and SNAX/APN Event Management Programming Manual

SNAX/XF Event Messages
SNAX/XF and SNAX/APN Event Management Programming Manual—426859-001
3-73
63: ZSX1-EVT-SW-LU-ERR
This message is generated by the service manager.
Effect. The switched floating LU is not available for use.
Recovery. Abort the PU and restart the PU and LU.
If ZSX1-TKN-ERRCODE is 31 (no buffer space), retry the operation.
If ZSX1-TKN-ERRCODE is 255, 402, 1218, or 1219, abort the PU and then restart both
the PU and the LU.
If ZSX1-TKN-ERRCODE is 410, reconfigure the LU to have a ZSX1-TKN-LU-REC-
SIZE value in the correct range for the type of line being used, then restart the LU.
If ZSX1-TKN-ERRCODE is a file-system error code other than 31, refer to the
Guardian Procedure Errors and Messages Manual for further information about the
error.