SNAX/XF and SNAX/APN Event Management Programming Manual

SNAX/XF Event Messages
SNAX/XF and SNAX/APN Event Management Programming Manual—426859-001
3-85
81: ZSX1-EVT-LUNS-ERR-CON
In attempting to establish a passthrough session with a host application, LUNS was
unable to find the object named in ZSX1-TKN-LUNS-OBJ1 for the reason indicated by
ZSX1-TKN-LUNS-INFO1, which can have the following octal values:
Effect. The request that was being processed is rejected.
%5 Unable to find the gateway LU (GATELU) object ZSX1-TKN-LUNS-OBJ1
when turning STATIC off. ZSX1-TKN-LUNS-OBJ2 is the name of the
terminal LU.
%6 Unable to find the gateway line (GATELINE) object ZSX1-TKN-LUNS-OBJ1
specified in the ESS table record named in ZSX1-TKN-LUNS-OBJ2.
ZSX1-TKN-LUNS-INFO2 has the following meaning:
1 CPU down
2 Line not added
3 Line not in Line not configured to the WAN subsystem
%7 Unable to find the gateway LU object ZSX1-TKN-LUNS-OBJ1 specified in
the ESS table record named in ZSX1-TKN-LUNS-OBJ2.
%10 Unable to find the gateway PU (GATEPU) object ZSX1-TKN-LUNS-OBJ1
specified in the ESS table record named in ZSX1-TKN-LUNS-OBJ2.
%11 Unable to find the PU object ZSX1-TKN-LUNS-OBJ1 using the SNAX/XF
internal RVT index given in ZSX1-TKN-LUNS-INFO2.
%12 Unable to find the LU under the PU object ZSX1-TKN-LUNS-OBJ1 using the
origin address field (OAF) given in ZSX1-TKN-LUNS-INFO2. PU status is
given in ZSX1-TKN-LUNS-INFO3.
%13 Unable to find the LU under the PU object ZSX1-TKN-LUNS-OBJ1 using the
destination address field (DAF) given in ZSX1-TKN-LUNS-INFO2. PU status
is given in ZSX1-TKN-LUNS-INFO3.
%20 Unable to use an LU on the gateway PU named in ZSX1-TKN-LUNS-OBJ1
and specified in the GATEPU operand of the ESS table record named in
ZSX1-TKN-LUNS-OBJ2. This error occurs because the MAXPTS value has
been exceeded. The value of ZSX1-TKN-LUNS-INFO2 is the MAXPTS value
specified when the PU was added through SCF. The value of ZSX1-TKN-
LUNS-INFO3 is the current number of passthrough sessions.
%21 Unable to use an LU on the gateway PU named in ZSX1-TKN-LUNS-OBJ1
and specified in the GATEPU operand of the ESS table record named in
ZSX1-TKN-LUNS-OBJ2. This error occurs because none of the LUs are in the
proper state. The value of ZSX1-TKN-LUNS-INFO2 is the LU^RCB.INFO
from the last LU on the PU. The value of ZSX1-TKN-LUNS-INFO3 is the
LU^RCB.STATUS of the last LU on the PU.
%22 Unable to find an available LU on the gateway line named in ZSX1-TKN-
LUNS-OBJ1 and specified in the GATELINE operand of the ESS table record
named in ZSX1-TKN-LUNS-OBJ2. This error occurs because none of the LUs
are in the proper state. The value of ZSX1-TKN-LUNS-INFO2 is the
LU^RCB.INFO of the last LU on the last PU. The value of ZSX1-TKN-
LUNS-INFO3 is the LU^RCB.STATUS of the last LU on the last PU.