SNAX/XF and SNAX/APN Event Management Programming Manual

SNAX/XF Event Messages
SNAX/XF and SNAX/APN Event Management Programming Manual—426859-001
3-92
81: ZSX1-EVT-LUNS-ERR-CON
•
Supporting documentation such as Event Management Service (EMS) logs, trace
files, and a CPU dump, if applicable
If your local operating procedures require contacting the Global Customer Support
Center (GCSC), please also supply your system number and the numbers and versions
of all related products.
2325
Cause. An associated object (line, PU, or LU), named in ZSX1-TKN-LUNS-OBJ1, is
not in the proper state.
The value of ZSX1-TKN-LUNS-INFO1 is the object’s state from the $SSCP’s Resource
Control Block (RCB). The value of ZSX1-TKN-LUNS-INFO2 indicates the object type,
as follows:
Effect. The request that was being processed is rejected.
Recovery. Check the state of the object using the STATUS command, and correct it if
possible. If the problem persists, contact the Global Customer Support Center (GCSC),
providing all relevant information as follows:
•
Descriptions of the problem and accompanying symptoms
•
Details from the message(s) generated
•
Supporting documentation such as Event Management Service (EMS) logs, trace
files, and a CPU dump, if applicable
If your local operating procedures require contacting the Global Customer Support
Center (GCSC), please also supply your system number and the numbers and versions
of all related products.
2326
Cause. A FINDDCT error occurred during an attempt to communicate with the remote
LU named in ZSX1-TKN-LUNS-OBJ1 through the remote service-manager process
named in ZSX1-TKN-LUNS-OBJ2.
The value of ZSX1-TKN-LUNS-INFO1 is the remote system number.
Effect. The request that was being processed is rejected.
Recovery. Issue another logon or logoff. If the problem persists, contact the Global
Customer Support Center (GCSC), providing all relevant information as follows:
•
Descriptions of the problem and accompanying symptoms
•
Details from the message(s) generated
0LINE
1PU
2LU