SNAX/XF and SNAX/APN Event Management Programming Manual

SNAX/XF Event Messages
SNAX/XF and SNAX/APN Event Management Programming Manual—426859-001
3-96
81: ZSX1-EVT-LUNS-ERR-CON
If this error is recorded while SNAXUTL is not running, issue an ALTER SUBSYS
command setting the ZSX1-TKN-SET-TBL token to the name of the current SET table.
If the error continues to be recorded while SNAXUTL is not running, contact the Global
Customer Support Center (GCSC).
When contacting the Global Customer Support Center (GCSC), provide all relevant
information as follows:
•
Descriptions of the problem and accompanying symptoms
•
Details from the message(s) generated
•
Supporting documentation such as Event Management Service (EMS) logs, trace
files, and a CPU dump, if applicable
If your local operating procedures require contacting the Global Customer Support
Center (GCSC), please also supply your system number and the numbers and versions
of all related products.
2341
Cause. The SET table referenced in an ALTER SUBSYS command is not present in the
specified subvolume.
Effect. The request that was being processed is rejected.
Recovery. Determine why the SET table is not present and perform the
appropriate action.