SNAX/XF and SNAX/APN Event Management Programming Manual

SNAX/XF Event Messages
SNAX/XF and SNAX/APN Event Management Programming Manual—426859-001
3-118
113: ZSX1-EVT-SSNULL-FAIL
ZEMS-TKN-EMPHASIS
contains the value ZSPI-VAL-FALSE, indicating that this event is not a critical
event. This token is described in the EMS Manual.
ZEMS-TKN-CONSOLE-PRINT
contains the value ZSPI-VAL-FALSE. This token is described in the EMS Manual.
ZSPI-TKN-MANAGER
is the name of the service-manager process (the SUBSYS object name), as described
in Section 3 of the SNAX/XF Management Programming Manual.
ZSX1-TKN-CODE-LOC
is the address where the error occurred.
ZSX1-TKN-ERRCODE
is the error code.
Conditional Tokens
ZSX1-TKN-FAILED-TOKENCODE
is the token code that was being processed when the error occurred.
Cause. An error occurred during a call to SSNULL. This event message is generated by
the SPI component of the service manager.
Effect. None.
Recovery. This is an informative message only; no corrective action is needed.
However, if the problem persists, contact the Global Customer Support Center (GCSC).
When contacting the Global Customer Support Center (GCSC), provide all relevant
information as follows:
•
Descriptions of the problem and accompanying symptoms
•
Details from the message(s) generated
•
Supporting documentation such as Event Management Service (EMS) logs, trace
files, and a CPU dump, if applicable
If your local operating procedures require contacting the Global Customer Support
Center (GCSC), please also supply your system number and the numbers and versions
of all related products.