SNAX/XF and SNAX/APN Event Management Programming Manual

SNAX/XF Event Messages
SNAX/XF and SNAX/APN Event Management Programming Manual—426859-001
3-124
116: ZSX1-EVT-INCONS-PTHRU-SESS-CNT
ZEMS-TKN-CONSOLE-PRINT
contains the value ZSPI-VAL-TRUE. This token is described in the EMS Manual.
ZSX1-TKN-MAX-PTHRU-SESS
is the maximum number of passthrough sessions as specified by the ZSX1-TKN-
MAX-PTHRU-SESS token.
ZSX1-TKN-CUR-PTHRU-SESS
is the current number of passthrough sessions that are outstanding, according to
the SNAX/XF subsystem. This value is greater than or equal to the value of
ZSX1-TKN-MAX-PTHRU-SESS.
ZSX1-TKN-VERIF-PTHRU-SESS
is the actual number of existing passthrough sessions determined by internal
verification.
Cause. Inconsistent passthrough session counts exist because an internal error has
occurred in the service-manager process. If the value of ZSX1-TKN-VERIF-PTHRU-
SESS is less than the value of ZSX1-TKN-CUR-PTHRU-SESS, the value of CUR-
PTHRU-SESS is adjusted to match the value of VERIF-PTHRU-SESS.
Effect. None; the process continues.
Recovery. If this message occurs repeatedly, start a trace of the service manager at the
time the error occurs. Then contact the Global Customer Support Center (GCSC).
When contacting the Global Customer Support Center (GCSC), provide all relevant
information as follows:
•
Descriptions of the problem and accompanying symptoms
•
Details from the message(s) generated
•
Supporting documentation such as Event Management Service (EMS) logs, trace
files, and a CPU dump, if applicable
If your local operating procedures require contacting the Global Customer Support
Center (GCSC), please also supply your system number and the numbers and versions
of all related products.