SNAX/XF and SNAX/APN Event Management Programming Manual

Introduction
SNAX/XF and SNAX/APN Event Management Programming Manual—426859-001
1-4
Event Messages Sent by SNAX/XF
Table 1-1 lists the SNAX/XF event messages, divided into these categories.
Table 1-1. SNAX/XF Event Messages (page 1 of 3)
Event
Number Symbolic Name (ZSX1-EVT-) Description
ZCOM Event Messages (ZCOM-EVT-)
-4 IO-FATAL-ERROR Fatal error on logical device
ZCL2 Event Messages (ZCL2-EVT-)
301 ET_QIO-INIT SNAX over Ethernet QIO initialization failed.
302 ET-QIO-VERSION SNAX over Ethernet QIO version
incompatibility.
303 ET-QIO-FATAL-ERROR SNAX over Ethernet encountered an
unrecoverable QIO error.
304 ET-QIO-RESOURCE SNAX over Ethernet encountered a QIO
resource shortage.
305 ET-RESOURCE SNAX over Ethernet encountered a resource
shortage.
306 ET-FRMR SNAX over Ethernet either sent or received
FRMR response frame.
Line-Handler Event Messages
2 STATE-MACH-ERR State-machine error
3 NO-POOL-SPACE No buffer pool space
4 PC-REQ-ERR Path-control request error
5 TS-INTERNAL-ERR Line-handler internal error
7 CONMGR-INACT Line Handler cannot communicate with the
Concentrator Manager
8 BKUP-NOTUP Service Manager or line handler unable to
create its backup process
21 LINK-INOP Link INOP message received
22 LINE-UP Line up
23 LINE-DOWN Line down
24 SW-LINE-ERR Switched-line error
25 IO-WARNING-ERR Nonfatal error in line configuration
26 Not used
27 IO-PAGES-WARNING Too many lines in one MULTI line handler
118 ACT-LINK-ERR ACTLINK command failure
119 TS-FENOBUFSPACE Multiple occurrences of file-system error 31