SNAX/XF and SNAX/APN Event Management Programming Manual

SNAX/APN Event Messages
SNAX/XF and SNAX/APN Event Management Programming Manual—426859-001
4-23
7: ZSX1-EVT -CONMGR-INACT
ZSPI-TKN-MANAGER
is the name of the service-manager process (the SUBSYS object name), as described
in Section 3 of the SNAX/APN Management Programming Manual.
ZEMS-TKN-LDEVNUMBER
identifies the logical device number. This is the 32-bit equivalent of
ZEMS-TKN-LDEV.
ZEMS-TKN-XLDEVNAME
is the string equivalent of the logical device number.
ZEMS-TKN-LDEV
is a standard EMS token described in the EMS Manual.
ZSX1-TKN-CONMGR-NAME
is the fully-qualified name of the Concentrator Manager.
Cause. The CONMGR process was not started when the SNAX line-handler tried to
communicate with it.
Effect. If the event message is sent as a result of a programmatic or SCF START LINE
request on a SNAX/APN line, the line is not started. If the above message is displayed
as a result of a STOP DEVICE request on a SNAX/APN line, the message is
informational only. The device is stopped if there are no further errors.
Recovery. Start the CONMGR process programmatically or by using SCF. If the
message is sent as a result of an START LINE request, abort and restart the line.