SNAX/XF and SNAX/APN Event Management Programming Manual

SNAX/APN Event Messages
SNAX/XF and SNAX/APN Event Management Programming Manual—426859-001
4-26
8: ZSX1-EVT-BKUP-NOTUP
error codes can be found in the ServerNet Communications Configuration and
Management Manual.
ZSX1-TKN-ERRCODE-DETAIL
is the code for the error detail. The error detail codes can be found in the Guardian
Procedure Errors and Messages Manual.
Cause. The primary SNAX line-handler or service-manager process is unable to start
its backup process.
Effect. The SNAX/APN device does not have fault-tolerant capabilities at this time.
Recovery. Verify that you specified a valid backup CPU number in the SCF ADD
DEVICE command. Correct any problem indicated by the error codes. To ensure that
the SNAX/APN device has fault-tolerant capabilities, issue a STOP DEVICE command,
then issue ADD DEVICE and START DEVICE requests to the WANMGR, specifying a
valid backup CPU.