SNAX/XF and SNAX/APN Event Management Programming Manual

Introduction
SNAX/XF and SNAX/APN Event Management Programming Manual—426859-001
1-8
Event Messages Sent by SNAX/APN
7 CONMGR-INACT Line Handler cannot communicate with the
Concentrator Manager
8 BKUP-NOTUP Service Manager or line handler unable to
create its backup process
21 LINK-INOP Link INOP message received
22 LINE-UP Line up
23 LINE-DOWN Line down
24 SW-LINE-ERR Switched-line error
25 IO-WARNING-ERR Nonfatal error in line configuration
26 MEMORY-ALERT Entering or exiting memory-congestion
condition
27 IO-PAGES-WARNING Too many lines in one MULTI line handler
118 ACT-LINK-ERR ACTLINK command failure
119 TS-FENOBUFSPACE Multiple occurrences of file-system error 31
132 MESSAGE-SYSTEM-
INTERFACE-ERROR
The SNAX interface to the X.25 line handler
was unable to allocate message system queue
elements (MSQE) or message system control
blocks (MSCB).
PU Event Messages
41 PU-READY PU ready
42 PU-NOT-READY PU not ready
43 SW-PU-FAIL Switched PU failed
44 SW-PU-ERR Switched PU error
45 PU-ACTV PU active
46 Not used
47 PUID-MISMATCH Dial-in operation from a remote PU was
rejected
48 XID-FAIL Error in XID Format 3 exchange
49 SW-SESSION-TIMEOUT Application failed after connection
117 Not used
LU Event Messages
61 Not used
62 Not used
63 Not used
Table 1-2. SNAX/APN Event Messages (page 2 of 4)
Event
Number Symbolic Name (ZSX1-EVT-) Description