SNAX/XF and SNAX/APN Event Management Programming Manual

SNAX/APN Event Messages
SNAX/XF and SNAX/APN Event Management Programming Manual—426859-001
4-56
44: ZSX1-EVT-SW-PU-ERR
ZEMS-TKN-EMPHASIS
contains the value ZSPI-VAL-FALSE, indicating that this event is not a critical
event. This token is described in the EMS Manual.
ZEMS-TKN-CONSOLE-PRINT
contains the value ZSPI-VAL-TRUE. This token is described in the EMS Manual.
ZSPI-TKN-MANAGER
is the name of the service-manager process (the SUBSYS object name), as described
in Section 3 in the SNAX/APN Management Programming Manual.
ZSX1-TKN-CAUSE-CODE
indicates the error that caused the event. Some possible values are as follows:
ZSX1-TKN-PU-STATE
indicates the PU state. This token is described in Section 4, “Common Definitions”
in the SNAX/APN Management Programming Manual.
ZSX1-TKN-SW-STATE
has no meaning in a SNAX/APN environment.
ZSX1-TKN-TEST-STATE
indicates the current PU test state. This token is described in Section 4 of the
SNAX/APN Management Programming Manual.
ZSX1-TKN-ERRCODE
is an error code that indicates why the event occurred. Some possible values are as
follows:
Any other error number is a file-system error, including the following errors:
23 Indicates that a REQCONT (request contact) failed.
24 Indicates that a send CONTACT failed.
25 Indicates that a CONTACT command failed.
28 Indicates that the call failed.
400 Indicates that the PU is not stopped.
401 Indicates that the PU is not started.
31 Indicates that no buffer space is available.
201 Indicates that the current path to the device is down, the device is
nonexistent, or there is an error in the message-system interface.