Manualshelf

SNAX/XF and SNAX/APN Event Management Programming Manual

ManualsBrandsHP ManualsServerHP NonStop G-Series
251252253254255256257258259260
SNAX/APN Event Messages
SNAX/XF and SNAX/APN Event Management Programming Manual—426859-001
4-60
45: ZSX1-EVT-PU-ACTV
Conditional Tokens
ZSX1-TKN-BASE-ALIAS-LU
does not apply to SNAX/APN.
ZSX1-TKN-ASSOC-SUBDEV
does not apply to SNAX/APN.
Cause. A PU was successfully connected with an activate request or reconnected after a
previous error. This message is generated by the service manager.
Effect. The PU is available for use, and the system waits for the next command.
Recovery. This is an informative message only; no corrective action is needed.