SNAX/XF and SNAX/APN Event Management Programming Manual

SNAX/APN Event Messages
SNAX/XF and SNAX/APN Event Management Programming Manual—426859-001
4-65
48: ZSX1-EVT-XID-FAIL
ZSPI-TKN-MANAGER
is the name of the service-manager process (the SUBSYS object name), as described
in Section 3 in the SNAX/APN Management Programming Manual.
ZSX1-TKN-BIT-OFFSET
is the bit offset into the XID frame.
ZSX1-TKN-BYTE-OFFSET
is the byte offset into the XID frame.
ZSX1-TKN-SENSE-CODE
is the SNA sense data value. The meanings of these values are given in Table 4-1.
Cause. During an XID (Format 3) exchange, SNAX/APN detected an error. The error,
returned in ZSX1-TKN-SENSE-CODE, is one of the sense data values whose meanings
are given in Table 4-1
.
Effect. The XID exchange is terminated, and the PU is not started.
Recovery. Analyze the sense code and the XID frame bit and byte offsets, and
reconfigure so that the configuration parameters of the two link stations are no longer in
conflict.
Table 4-1. Sense Data Values for Event Message 48 (page 1 of 4)
Sense
Data Value Description
0801 0012 There were no available numbers to represent TG (Transmission Group).
0806 002C The identification in either the Node Identification field or the Network Name
(X'0E', CP name) control vector in a received Exchange Identification frame,
Format 3 (XID3) is different from what this node was configured to expect.
0809 003A The null Exchange Identification frame (XID) was received when a link
activation XID3 was expected.
0809 003B The null XID was received when a nonactivation XID3 was expected.
0809 003C The received XID3 had the Exchange State indicators set to “prenegotiation”
when either “Exchange State indicators not supported” or
“negotiation-proceeding exchange” was expected.
0809 003D A nonactivation XID3 was received when a null XID or link activation XID
was expected.
0809 003E A link activation XID3 was received when a null XID or nonactivation XID3
was expected.
0809 003F An attempt was made by a secondary link station to initiate a nonactivation
XID exchange when this option is not supported on the TG.
0809 0040 An invalid or unexpected mode-setting command was received.