SNAX/XF and SNAX/APN Event Management Programming Manual

Introduction
SNAX/XF and SNAX/APN Event Management Programming Manual—426859-001
1-10
Event Messages Sent by SNAX/APN
113 SSNULL-FAIL Error during SSNULL call
114 SSPUT-FAIL Error during SSPUT call
Checkpointing Event Messages
124 CHECKPOINT-FAILED Checkpoint to backup service-manager
process failed
125 CHECKPOINT-INCOMPLETE Checkpoint to backup service-manager
process incomplete
Note. Most event messages with the ZSX1 subsystem ID can be generated by either
SNAX/APN or SNAX/XF, if both subsystems are running. Message numbers labeled “Not
used” in Table 1-2 are returned only for SNAX/XF operation. For full descriptions of all event
messages that SNAX/XF can generate, including information about the shared messages that
are relevant to SNAX/XF, refer to Section 3, SNAX/XF Event Messages.
Table 1-2. SNAX/APN Event Messages (page 4 of 4)
Event
Number Symbolic Name (ZSX1-EVT-) Description