SNAX/XF and SNAX/APN Event Management Programming Manual

SNAX/APN Event Messages
SNAX/XF and SNAX/APN Event Management Programming Manual—426859-001
4-85
81: ZSX1-EVT-LUNS-ERR-CON
Conditional Tokens
ZSX1-TKN-FS-ERR
identifies a procedure-call error.
ZSX1-TKN-LUNS-INFO1
is event-related information. For example, if the value of ZSX1-TKN-ERRCODE is
2307 (unable to acquire buffer), ZSX1-TKN-LUNS-INFO1 contains the word size;
if the value of ZSX1-TKN-ERRCODE is 2311 (USESEGMENT error),
ZSX1-TKN-LUNS-INFO1 contains the segment ID. If ZSX1-TKN-LUNS-INFO1
is not applicable for this particular LUNS error, it is set to 0000.
ZSX1-TKN-LUNS-OBJ1
is the object name or up to eight characters of other ASCII information. Objects
include LUs, PUs, lines, tables, and table entries.
ZSX1-TKN-LUNS-INFO2
is object information.
ZSX1-TKN-LUNS-OBJ2
is the name of an additional object.
ZSX1-TKN-LUNS-INFO3
is information about the additional object.
Cause, Effect, and Recovery
The probable cause of this event, its effect on the system, and the action Compaq
recommends that you take to remedy it depend on the value contained in
ZSX1-TKN-ERRCODE, as described on the following pages.
2307
Cause. LUNS was unable to get ZSX1-TKN-LUNS-INFO1 words of buffer space
when processing a request on behalf of the LU named ZSX1-TKN-LUNS-OBJ2 under
the line named ZSX1-TKN-LUNS-OBJ1.
Effect. The request that was being processed is rejected.
Recovery. Try the request again. If the terminal is locked up, have the operator abort
and restart the LU through SCF. If the problem persists, contact the Global Customer
Support Center.
Note. When this event message is generated by SNAX/XF, it can report additional LUNS error
codes that do not apply to SNAX/APN. If you are also using SNAX/XF, refer to the SNAX/XF
Management Programming Manual for descriptions of these errors.