SNAX/XF and SNAX/APN Event Management Programming Manual

SNAX/APN Event Messages
SNAX/XF and SNAX/APN Event Management Programming Manual—426859-001
4-134
129: ZSX1-EVT-ELF-LOGON-ERR
Effect. The logon request is rejected.
Recovery. Retry the logon. If the problem persists, check the coding and/or
configuration of the SNALU application.
Reason Code 00000029
Cause. A SNALU LU was aborted by an operator causing the termination of logon
processing
Effect. The logon request is rejected.
Recovery. Restart the LU and retry the logon.
Reason Code 0000002A
Cause. During logon processing for a SNALU application, the LU definition is no
longer present. The LU may have been deleted by an operator after the logon
processing started.
Effect. The logon request is rejected.
Recovery. Re-add and restart the LU and retry the logon.
Reason Code 0000002B
Cause. Internal error.
Effect. The logon request is rejected.
Recovery. Retry the logon. If the problem persists, contact the Global Customer
Support Center (GCSC).
Reason Code 0000002C
Cause. Internal error.
Effect. The logon request is rejected.
Recovery. Retry the logon. If the problem persists, contact the Global Customer
Support Center (GCSC).
Reason Code 0000002D
Cause. Internal error.
Effect. The logon request is rejected.
Recovery. Retry the logon. If the problem persists, contact the Global Customer
Support Center (GCSC).
Reason Code 0000002E
Cause. Internal error.
Effect. The logon request is rejected.