SNAX/XF and SNAX/APN Event Management Programming Manual

SNAX/APN Event Messages
SNAX/XF and SNAX/APN Event Management Programming Manual—426859-001
4-135
129: ZSX1-EVT-ELF-LOGON-ERR
Recovery. Retry the logon. If the problem persists, contact the Global Customer
Support Center (GCSC).
Reason Code 0000002F
Cause. A dynamic LU cannot be created for the logon because the MAXLUS limit
for the PU would be exceeded.
Effect. The logon request is rejected.
Recovery. Either stop the PU and increase its MAXLUS value or retry the logon at
another time.
Reason Code 00000030
Cause. A dynamic LU cannot be created for the logon because the MAXLUS limit
for the LINE would be exceeded.
Effect. The logon request is rejected.
Recovery. Either stop the LINE and increase its MAXLUS value or retry the logon
at another time.
Reason Code 00000031
Cause. Internal error.
Effect. The logon request is rejected.
Recovery. Retry the logon. If the problem persists, contact the Global Customer
Support Center (GCSC).
Reason Code 00000032
Cause. Internal error.
Effect. The logon request is rejected.
Recovery. Retry the logon. If the problem persists, contact the Global Customer
Support Center (GCSC).
Reason Code 00000033
Cause. Internal error.
Effect. The logon request is rejected.
Recovery. Retry the logon. If the problem persists, contact the Global Customer
Support Center (GCSC).
Reason Code 00000034
Cause. Internal error.
Effect. The logon request is rejected.