SNAX/XF and SNAX/APN Event Management Programming Manual

SNAX/XF Event Messages
SNAX/XF and SNAX/APN Event Management Programming Manual—426859-001
3-6
-4: ZCOM-EVT-IO-FATAL-ERR
-5: ZCOM-VAL-IO-ERR-DEFINEPOOL
Cause. A failure occurred when SNAX/XF issued a call the DEFINEPOOL procedure.
This message is generated by the line handler.
Effect. SNAX/XF terminates.
Recovery. Verify that there are enough memory resources for the line-handler process.
-4: ZCOM-VAL-IO-ERR-LOCKMEMORY
Cause. A failure occurred when SNAX/XF issued a call to the LOCKMEMORY
procedure. This message is generated by the service manager.
Effect. SNAX/XF terminates.
Recovery. Verify that there are enough memory resources for the service-manager
process or the line-handler process.
-2: ZCOM-VAL-IO-ERR-USESEG
Cause. A failure occurred when SNAX/XF used a memory segment. This message is
generated by the line handler.
Effect. SNAX/XF terminates.
Recovery. Verify that there are enough memory resources for the line-handler process.
-1: ZCOM-VAL-IO-ERR-ALLOCATESEG
Cause. There was a failure in the allocation of a memory segment. This message is
generated by the service manager or the line handler.
Effect. SNAX/XF terminates.
Recovery. Verify that there are enough resources for the service-manager process or the
line-handler process.
1100: ZSX1-VAL-IO-ERR-RESOURCE-ALLOC
Cause. A failure to allocate system resources occurred.
Effect. SNAX/XF terminates.
Recovery. Verify that there are enough system resources available.
1101: ZCOM-VAL-IO-ERR-DCT-INFO
Cause. There was a failure to obtain system information from the destination control
table (DCT).
Effect. SNAX/XF terminates.
Recovery. Contact the Global Customer Support Center (GCSC) and provide all
relevant information as follows: