SNAX/XF and SNAX/APN Event Management Programming Manual

SNAX/XF Event Messages
SNAX/XF and SNAX/APN Event Management Programming Manual—426859-001
3-50
43: ZSX1-EVT-SW-PU-FAIL
If ZSX1-TKN-ERRCODE is 401, abort the line and then restart it.
If ZSX1-TKN-ERRCODE is 405, reconfigure the PU using a lower value for
ZMAX-LUS (in ZSX1-MAP-PU) , and then restart the PU.
If ZSX1-TKN-ERRCODE is 406, reconfigure the PU with a valid value for ZSX1-TKN-
PUID-BLOCK or ZSX1-TKN-PUID-NUM, and then restart the PU.
If ZSX1-TKN-ERRCODE is 408, reconfigure the line with a value for ZREC-SIZE
(in ZSX1-MAP-LINE) that is valid for the line type, and then restart the line.