SNAX/XF and SNAX/APN Event Management Programming Manual

SNAX/XF Event Messages
SNAX/XF and SNAX/APN Event Management Programming Manual—426859-001
3-52
44: ZSX1-EVT-SW-PU-ERR
ZCOM-TKN-SUBJ-PU
is the fully qualified name of the PU for which this event occurred.
ZEMS-TKN-EMPHASIS
contains the value ZSPI-VAL-FALSE, indicating that this event is not a critical
event. This token is described in the EMS Manual.
ZEMS-TKN-CONSOLE-PRINT
contains the value ZSPI-VAL-TRUE. This token is described in the EMS Manual.
ZSPI-TKN-MANAGER
is the name of the service-manager process (the SUBSYS object name), as described
in Section 3 of the SNAX/XF Management Programming Manual.
ZSX1-TKN-CAUSE-CODE
indicates the error that caused the event. Some possible values are as follows:
ZSX1-TKN-PU-STATE
indicates the PU state. This token is described in Section 4, “Common Definitions”
in the SNAX/XF Management Programming Manual.
ZSX1-TKN-SW-STATE
indicates the switched PU state. This token is described in Section 4 of the SNAX/XF
Management Programming Manual.
ZSX1-TKN-TEST-STATE
indicates the current PU test state. This token is described in Section 4 of the
SNAX/XF Management Programming Manual.
23 Indicates that a REQCONT (request contact) failed.
24 Indicates that a send CONTACT failed.
25 Indicates that a CONTACT command failed.
26 Indicates that a send ACTPU command failed.
27 Indicates that an ACTPU command failed.
28 Indicates that the call failed.