SNAX/XF LU Network Services Manual

Messages and Codes
ESS System Messages
097841 Tandem Computers Incorporated B–9
" CANNOT TURN STATIC ON WHILE IN SESSION--> S0022 "
Cause
During an LU-LU session with an application in either the Tandem system or the
host system, the SYSTEM REQUEST key was pressed and an Order command
with a STATIC ON attribute was entered. This caused LUNS to attempt to
establish a static path to the host, which cannot be done while in an LU-LU
session.
Effect
The failing command is ignored and the terminal’s keyboard is reset to allow the
entry of another command.
Recovery
If you wish to execute the failing command, enter a command that causes a logoff,
and then reissue the command.
" CANNOT TURN STATIC OFF WHILE IN SESSION --> S0023 "
Cause
During an LU-LU session with an application in either the Tandem system or the
host system, the SYSTEM REQUEST key was pressed and an Order command
with a STATIC OFF attribute was entered. This caused LUNS to attempt to take
down a static path to the host, which cannot be done while in an LU-LU session.
Effect
The failing command is ignored, the terminal remains in session and the terminal’s
keyboard is reset to allow the entry of another command.
Recovery
If you wish to execute the failing command, enter a command that causes a logoff,
and then reissue the command.