SNAX/XF LU Network Services Manual

SNAXUTL Error Messages
SNAXUTL Error Messages
E–2 097841 Tandem Computers Incorporated
SNAXUTL ERROR NUMBER: 0340
Invalid data was found following object parameters in the command table.
SNAXUTL ERROR NUMBER: 0360
An invalid character was found following a command attribute in the command
table.
SNAXUTL ERROR NUMBER: 0380
An invalid character was found following a command operand in the command
table.
SNAXUTL ERROR NUMBER: 0400
An invalid character was found following a command in the command table.
SNAXUTL ERROR NUMBER: 0420
A GETPOOL error occurred during allocation of a queue head for a command
table.
SNAXUTL ERROR NUMBER: 0460
A premature EOF was encountered during initialization of the input record
buffers.
SNAXUTL ERROR NUMBER: 0480
An I/O error was encountered during an attempt to create a temporary file for
holding process messages. One possible cause of this problem is that there is not
enough space on the default volume used when running the SNAXUTL program.
SNAXUTL ERROR NUMBER: 0500
An I/O error was encountered during an attempt to open the temporary file used
for holding process messages.
SNAXUTL ERROR NUMBER: 0520
An OPEN failure occurred on the $RECEIVE file.
SNAXUTL ERROR NUMBER: 0540
A READ error occurred during an attempt to read the $RECEIVE file.
SNAXUTL ERROR NUMBER: 0560
An I/O error occurred during an attempt to open the command input file.
Possible causes are that the file does not exist or that it is not an edit file.
SNAXUTL ERROR NUMBER: 0580
An I/O error occurred during the open of a command file.
SNAXUTL ERROR NUMBER: 0600
A failure occurred during the initialization of edit file control blocks for the
command file.
SNAXUTL ERROR NUMBER: 0620
A failure occurred during the open of the listing file.
SNAXUTL ERROR NUMBER: 0640
A USESEGMENT failure occurred during initialization of extended storage.