SNAX/XF LU Network Services Manual

SNAXUTL Error Messages
SNAXUTL Error Messages
097841 Tandem Computers Incorporated E–9
SNAXUTL ERROR NUMBER: 2240
An error occurred during processing of the current command The modifier
specified for the current command is invalid.
SNAXUTL ERROR NUMBER: 2260
An error occurred during processing of the current command.
The specified command or modifier is not unique.
SNAXUTL ERROR NUMBER: 2280
An error occurred during processing of the current command. The specified
command name is invalid.
SNAXUTL ERROR NUMBER: 2300
An error occurred during processing of the current command. The specified
command name is not unique.
SNAXUTL ERROR NUMBER: 2320
A premature EOF occurred during a scan for a command name. This problem is
usually caused by a missing END command.
SNAXUTL ERROR NUMBER: 2340
An invalid command name was found.
SNAXUTL ERROR NUMBER: 2360
A premature EOF was encountered during a scan for a command modifier.
SNAXUTL ERROR NUMBER: 2380
A premature EOF was encountered during a scan of a command.
SNAXUTL ERROR NUMBER: 2400
A required command object is not specified.
SNAXUTL ERROR NUMBER: 2420
A command object that is specified should not be present.
SNAXUTL ERROR NUMBER: 2440
A premature EOF was encountered during the read of a command.
SNAXUTL ERROR NUMBER: 2460
A premature EOF was encountered during the read of a command.
SNAXUTL ERROR NUMBER: 2480
An invalid character was found between operands. This character should be a
comma.
SNAXUTL ERROR NUMBER: 2500
A premature EOF was encountered during the scan for a command delimiter.
SNAXUTL ERROR NUMBER: 2520
An invalid token was found following a command.
SNAXUTL ERROR NUMBER: 2540
The first command in a command group is not the BEGIN command.