SNAX/XF LU Network Services Manual

Appendix F SNAX/XF Default BIND
097841 Tandem Computers Incorporated F–1
Default SNAX/XF BIND
Bytes and Values
SNAX/XF sends a default BIND if a BINDENTRY parameter is not specified in an SCF
ADD LINE, PU, or LU command, or if not specified in an ESS table entry.
Table F-1 contains a summary of BIND byte numbers and default values.
Table F-1. Summary of Default SNAX/XF BIND Values
Byte Value Explanation
0 %H31 BIND command
1 %H01 BIND type and format
2 %H03 FMPROF
3 %H03 TSPROF
4 %HB1 PRIPROT
5 %H90 SECPROT
6-7 %H3080
%H7080
COMPROT (SNA devices)
(6530 devices)
8 %H00 SSNDPAC
9 %H00 SRCVPAC
10-11 RUSIZES (see “Bytes 10-11” below)
12 %H00 PSNDPAC
13 %H00 reserved
14-25 PSERVIC (see “Bytes 14-25” below)
26 %H00 ENCR
27 %H00 PLUNAME length
Bytes 10-11 The values for RUSIZES specify the maximum length of data (in bytes) that can be sent
by primary and secondary LUs. The values exist as four hexadecimal digits. The two
leftmost digits apply to the secondary LU, and the two rightmost digits apply to the
primary LU.
SNAX/XF always uses internal default values for calculating the maximum send and
receive lengths.