SNAX/XF LU Network Services Manual

SNAXUTL ADD Commands
The SNAX/XF Utility
A–6 097841 Tandem Computers Incorporated
SNAXUTL ADD
Commands
The following is a description of all of the SNAXUTL ADD commands.
ADD ESSCMD Command The ADD ESSCMD command is used to add either logon (character-coded), logoff
(DLU), or order commands to the ESS table. These parameters are ordered by the
frequency in which they are most commonly used.
ADD ESSCMD command-name , CMDTYPE command-type
, SENDHOST { Y | N }
, GATELINE gateway-line
, GATEPU gateway-pu
, GATELU gateway-lu
, MULTIPLELOGON USE_CURRENT_PATH
, PLUNAME { dlu-name | # plu-name }
, SNATYPE sna-type
, PROTOCOL protocol
, RECSIZE recsize
, CHARACTERSET { EBCDIC | ASCII | KATAKANA }
, BINDENTRY bind-entry-name
, BINDTABLE bind-table-name
, REPDATA replacement-data
, CONCDATA concatenated-data
, USERDATA user-data
, STATIC { ON | OFF }
, TERMSELF ON ...
command-name
is the name of a command to be added to the ESS table. This operand is required.
It is not case-sensitive. The name can be from 1 to 32 characters long.
CMDTYPE command-type
specifies the type of command being created. Valid values for command-type
are:
INITSELF-RECEIVED
LOGOFF
LOGON-CHAR
LOGON-INIT
ORDER
This operand must be specified.
SENDHOST { Y | N }
specifies whether or not the logon is to be sent to an SNA host. The default value
is N.