SNAX/XF LU Network Services Manual

SNAXUTL ADD Commands
The SNAX/XF Utility
A–8 097841 Tandem Computers Incorporated
pu-name
is the device name corresponding to the physical unit. This value can be
from one to seven alphanumeric characters long, where the first character
is alphabetic.
Note that GATEPU should not be specified when either GATELINE or GATELU is
specified.
GATELU gateway-lu
is the gateway logical-unit name that is to be used when this command is sent to
the SNA host. The format of gateway-lu is:
[\ system-name .]$ device-name .# lu-name
where:
system-name
is the name of the system on which the gateway logical unit resides. This
value can be from one to seven alphanumeric characters long, where the
first character is alphabetic.
device-name
is the device name corresponding to the line. This value can be from one
to seven alphanumeric characters long, where the first character is
alphabetic.
lu-name
is the device name corresponding to the logical unit. This value can
consist of from one to seven alphanumeric characters, where the first
character is alphabetic.
Note that GATELU should not be specified when either GATELINE or GATEPU is
specified.