SNAX/XF LU Network Services Manual

SNAXUTL ADD Commands
The SNAX/XF Utility
A–10 097841 Tandem Computers Incorporated
A pound sign (#) preceding dlu-name is invalid when dlu-name is specified
in conjunction with SENDHOST Y.
The PLUNAME operand is invalid with:
CMDTYPE ORDER
CMDTYPE LOGOFF
CMDTYPE LOGON-CHAR when SENDHOST Y is also specified.
SNATYPE sna-type
specifies the type of SNA SLU support that is to be emulated by the terminal
entering this command. Valid values for sna-type are 0, 1, 2, 3, 4, and 6.
This optional operand has meaning only when SENDHOST N is specified and the
CMDTYPE is either LOGON-CHAR or LOGON-INIT. Otherwise, it is ignored.
PROTOCOL protocol
specifies the type of terminal protocol to be used by the terminal entering this
command. Valid values for protocol are CRT and ITI. This is ignored in
passthrough mode.
RECSIZE recsize
specifies the maximum RU size to be used by the terminal entering this command.
Valid values for recsize are decimal integers from 1 to 4096. This operand is
optional. This parameter will be overridden by the MAXRU specified in the
BIND.
CHARACTERSET { EBCDIC | ASCII | KATAKANA }
specifies whether or not character translation is to occur. EBCDIC turns
translation on so that:
When necessary, data sent from the terminal to a Tandem application is
translated from EBCDIC to ASCII.
When necessary, data sent from a Tandem application to the terminal is
translated from ASCII to EBCDIC.