SNMP Configuration and Management Manual

MIBs Supported by the SNMP Agent
SNMP Configuration and Management Manual—424777-006
3-5
RFC Compliance
RFC Compliance
All of the objects described in Table 3-1 comply with the definitions for System group
objects as set forth in RFC 1213, Management Information Base for Network
Management of TCP/IP-Based Internets: MIB-II.
sysName
1.3.6.1.2.1.1.5
read-write
DisplayString
(SIZE
(0..255))
A name associated with an
Internet address by which
the SNMP agent can be
reached.
A character string of 255 or fewer
characters.
If a TCP/IP process has been
specified in the
TCPIP^PROCESS^NAME
parameter, the value is derived from
the name received from a
gethostname call on that process.
Otherwise, it is derived from the
name received from a gethostname
call on the local $ZTC0 process.
sysLocation
1.3.6.1.2.1.1.6
read-write
DisplayString
(SIZE
(0..255))
The physical location of the
node on which the SNMP
agent is installed. This value
is stored in SNMPCTL.
Initially derived from the default value
of unknown. Can be set by an
authorized SNMP manager.
sysServices
1.3.6.1.2.1.1.7
read-only
INTEGER (0..127)
A numeric indication of the
set of services supported,
derived as defined in
RFC 1213.
The constant value for this object is
79, indicating that the following
services are supported:
physical (1)
datalink/subnetwork (2)
internet (3)
end-to-end (4)
applications (7)
Table 3-1. System Group Objects Supported by SNMP Agent (page 2 of 2)
Object and
Attributes Definition Format and Derivation of Value