SNMP Configuration and Management Manual

MIBs Supported by the SNMP Agent
SNMP Configuration and Management Manual—424777-006
3-7
MIB Objects
MIB Objects
Table 3-2 describes the MIB-II SNMP group objects that are supported by the SNMP
agent.
Table 3-2. SNMP Group Objects Supported by SNMP Agent (page 1 of 3)
Object and Attributes Definition
Format and Derivation of
Value
snmpInPkts
1.3.6.1.2.1.11.1
read-only
Counter
The total number of messages
received.
An integer set by the SNMP
agent counter.
snmpOutPkts
1.3.6.1.2.1.11.2
read-only
Counter
The total number of SNMP
messages sent.
An integer set by the SNMP
agent counter.
snmpInBadVersions
1.3.6.1.2.1.11.3
read-only
Counter
The total number of SNMP
messages received that were for
an unsupported SNMP version.
An integer set by the SNMP
agent counter.
snmpInBadCommunity-
Names
1.3.6.1.2.1.11.4
read-only
Counter
The total number of SNMP
messages received that used an
unknown SNMP community
name.
An integer set by the SNMP
agent counter.
snmpInBadCommunity-
Uses
1.3.6.1.2.1.11.5
read-only
Counter
The total number of SNMP
messages received that
represented an SNMP operation
not allowed by the community
named in the message.
An integer set by the SNMP
agent counter.
snmpInASNParseErrs
1.3.6.1.2.1.11.6
read-only
Counter
The total number of ASN.1 or
BER errors encountered when
decoding received SNMP
messages.
An integer set by the SNMP
agent counter.
snmpInTooBigs
1.3.6.1.2.1.11.8
read-only
Counter
The total number of SNMP PDUs
received for which the value of
the error-status field was
‘tooBig.’
The constant value for this
object is 0.
snmpInNoSuchNames
1.3.6.1.2.1.11.9
read-only
Counter
The total number of SNMP PDUs
received for which the value of
the error-status field was
‘noSuchName.’
The constant value for this
object is 0.
snmpInBadValues
1.3.6.1.2.1.11.10
read-only
Counter
The total number of SNMP PDUs
received for which the value of
the error-status field was
‘badValue.’
The constant value for this
object is 0.