SNMP Configuration and Management Manual

MIBs Supported by the SNMP Agent
SNMP Configuration and Management Manual—424777-006
3-9
MIB Objects
snmpOutNoSuchNames
1.3.6.1.2.1.11.21
read-only
Counter
The total number of PDUs
generated for which the value of
the error-status field was
‘noSuchName.’
An integer set by the SNMP
agent counter.
snmpOutBadValues
1.3.6.1.2.1.11.22
read-only
Counter
The total number of PDUs
generated for which the value of
the error-status field was
‘badValue.’
An integer set by the SNMP
agent counter.
snmpOutGenErrs
1.3.6.1.2.1.11.24
read-only
Counter
The total number of PDUs
generated for which the value of
the error-status field was
‘genErr.’
An integer set by the SNMP
agent counter.
snmpOutGetRequests
1.3.6.1.2.1.11.25
read-only
Counter
The total number of GetRequest
PDUs generated.
The constant value for this
object is 0.
snmpOutGetNexts
1.3.6.1.2.1.11.26
read-only
Counter
The total number of
GetNextRequest PDUs
generated.
The constant value for this
object is 0.
snmpOutSetRequests
1.3.6.1.2.1.11.27
read-only
Counter
The total number of SetRequest
PDUs generated.
The constant value for this
object is 0.
snmpOutGetResponses
1.3.6.1.2.1.11.28
read-only
Counter
The total number of
GetResponse PDUs generated.
An integer set by the SNMP
agent counter.
snmpOutTraps
1.3.6.1.2.1.11.29
read-only
Counter
The total number of trap PDUs
generated.
An integer set by the SNMP
agent counter.
snmpEnableAuthenTrap
s
1.3.6.1.2.1.11.30
read-write
INTEGER
An indication of whether the
SNMP agent is permitted to
generate authenticationFailure
traps. This value is stored in
SNMPCTL.
Valid values are:
1 (enabled)
2 (disabled)
The default value is 1. At
initial startup, the value is set
to 1, but it can be reset by
an authorized SNMP
manager.
Table 3-2. SNMP Group Objects Supported by SNMP Agent (page 3 of 3)
Object and Attributes Definition
Format and Derivation of
Value