SNMP Configuration and Management Manual

MIBs Supported by the SNMP Agent
SNMP Configuration and Management Manual—424777-006
3-15
MIB Objects
zagInEpName
1.3.6.1.4.1.169.3.155.1.7.2.1.1.2
read-only
DisplayString (SIZE (2..8))
The name assigned to
this endpoint. This object
is created when the
SNMP agent extracts the
index value from the
initial row creation
varbind.
$agentName.
#endpointName
The SNMP agent prepends
$agentName to
#endpointName.
ENDPOINT names are set
from SCF and must:
1. Be uppercase
2. Start with a #
3. Use only the valid
characters A through
Z and 0 through 9
zagInEpState
1.3.6.1.4.1.169.3.155.1.7.2.1.1.3
read-only
INTEGER
The current operational
state of the Endpoint.
One of these four numeric
state values, which can only
be read:
DEFINED (1)
STARTED (3)
STARTING (4)
STOPPED (5)
Default value is DEFINED.
Set by the SNMP agent.
zagInEpHostAddr
1.3.6.1.4.1.169.3.155.1.7.2.1.1.4
read-write
DisplayString
The local host IP
address that the agent is
to monitor for incoming
messages.
Format of #.#.#.#
For IP addresses, this value
must either be the default
value 0.0.0.0 or a fully
specified address (for
example, 103.252.12.3).
Can be set by an authorized
SNMP manager or from
SCF.
zagInEpNetwork
1.3.6.1.4.1.169.3.155.1.7.2.1.1.5
read-write
DisplayString
The name of the TCP/IP
process the SNMP agent
must use to establish the
socket session.
$TCP/IP process-name
The default process name is
$ZTC0.
Can be set by an SNMP
manager, from SCF, or by
using the
TCPIP^PROCESS^NAME
run startup parameter.
Table 3-3. zagInternal Group Objects Supported by SNMP Agent (page 4 of 8)
Object and Attributes Definition
Format and Derivation of
Value