SNMP Configuration and Management Manual

MIBs Supported by the SNMP Agent
SNMP Configuration and Management Manual—424777-006
3-16
MIB Objects
zagInProfile Group Objects: Define criteria that the
SNMP agent uses to
determine whether to
accept or reject incoming
requests from SNMP
managers that
communicate with the
SNMP agent through
TCP/IP.
In Figure 2-5
, the
authentication table
permits the SNMP agent
to accept Get and
GetNext requests from
any SNMP manager
belonging to the “public.”
zagInProfileTable
1.3.6.1.4.1.169.3.155.1.7.3.1
not-accessible
Sequence of ZagInProfileEntry
A list of profile entries.
zagInProfileEntry
1.3.6.1.4.1.169.3.155.1.7.3.1.1
not-accessible
zagInProfileEntry
A profile entry that
contains objects used for
authenticating a request
that arrives over TCP/IP.
zagInPfRowStatus
1.3.6.1.4.1.169.3.155.1.7.3.1.1.1
not-accessible through TCP/IP
read-write access through IPC
interface
INTEGER (1..6)
Used to manage the
creation, alternation, and
deletion of table rows.
The row must be in the
notReady or
notInService state for
any row object to be
modified.
Numeric value of 1 through
6. See Table 3-6
for
RowStatus values and their
descriptions. Set by the
SNMP agent or through
authenticated SNMP
requests received through
the IPC interface.
zagInPfName
1.3.6.1.4.1.169.3.155.1.7.3.1.1.2
not-accessible through TCP/IP
read-only access through IPC
interface
DisplayString
The name assigned to
this profile. This object is
created by the SNMP
agent by extracting the
index value for the row
creation varbind.
#profile-name
The default value is
#DEFAULT.
Nondefault PROFILE table
entry objects can be
configured from SCF or
through authenticated
SNMP requests received
through the IPC interface.
Table 3-3. zagInternal Group Objects Supported by SNMP Agent (page 5 of 8)
Object and Attributes Definition
Format and Derivation of
Value