SNMP Configuration and Management Manual
MIBs Supported by the SNMP Agent
SNMP Configuration and Management Manual—424777-006
3-17
MIB Objects
zagInPfState
1.3.6.1.4.1.169.3.155.1.7.3.1.1.3
 not-accessible through TCP/IP
 read-only access through IPC
  interface
 INTEGER
The current operational 
state of the profile.
Possible states are:
 DEFINED (1)
 STARTED (3)
 STARTING (4)
 STOPPED (5)
Default value is DEFINED. 
Set by the SNMP agent. 
zagInPfHostAddr
1.3.6.1.4.1.169.3.155.1.7.3.1.1.4
 not-accessible through TCP/IP
 read-write access through IPC
  interface
 DisplayString
The address of the host 
sending the message. In 
conjunction with the 
community name and 
access attributes, this 
address provides the 
authentication attributes 
for validating received 
messages.
The value is set from SCF 
or through authenticated 
SNMP requests received 
through the IPC interface.
zagInPfCommunity
1.3.6.1.4.1.169.3.155.1.7.3.1.1.5
 not-accessible through TCP/IP
 read-write access through IPC
  interface
 DisplayString
A data string compared 
with the agent section of 
the community string of 
received messages to 
authenticate the 
message. 
The SNMP agent uses 
the agent community 
string for request 
authentication and 
passes the entire 
community string to 
subagents.
The agent section of the 
community string can be 0 
to 50 bytes. The default 
value is public.
The value can be set from 
SCF or through 
authenticated SNMP 
requests received through 
the IPC interface.
zagInPfAccess
1.3.6.1.4.1.169.3.155.1.7.3.1.1.6
 not-accessible through TCP/IP
 read-write access through IPC
  interface
 INTEGER {readOnly (1), 
 readWrite (2)}
The authority of the 
community members to 
retrieve and alter 
network management 
information.
The default value is 1 (read-
only). Can be set from SCF 
or through authenticated 
SNMP requests received 
through the IPC interface.
zagInTrapdest Group Objects: Define SNMP manager 
Internet addresses and 
TCP/IP processes used 
by the SNMP agent 
when routing traps.
Table 3-3. zagInternal Group Objects Supported by SNMP Agent (page 6 of 8)
Object and Attributes Definition
Format and Derivation of 
Value










