SNMP Configuration and Management Manual

MIBs Supported by the SNMP Agent
SNMP Configuration and Management Manual—424777-006
3-20
SNMP Manager Access to Private MIB Objects
SNMP Manager Access to Private MIB Objects
Table 3-4 identifies the objects in the SNMP agent’s private MIB that allow access
(read-only or read-write) by SNMP management applications through the SNMP
interface. For a detailed definition of all of the SNMP agent’s private MIB objects, see
Table 3-3.
Table 3-4. Access Status of SNMP Agent’s Private MIB Objects (page 1 of 3)
Object Name
Object
Syntax
Manager
Access Description
zagInProcess Objects
zagInProcCurrTime DisplayString read-only The current time on the SNMP
agent’s host.
zagInProcVersion DisplayString read-only The SNMP agent’s version.
zagInProcName DisplayString read-only The SNMP agent’s process
name.
zagInProcPAID DisplayString read-only The SNMP agent’s process
access ID.
zagInProcPrimPID DisplayString read-only The SNMP agent’s primary
process ID.
zagInProcBkupPID DisplayString read-only The SNMP agent’s backup
process ID.
zagInProcCreatTime DisplayString read-only The SNMP agent’s instantiation
timestamp.
zagInProcCpuTime DisplayString read-only The SNMP agent’s CPU usage
time.
zagInProcPri Integer read-only The SNMP agent’s priority.
zagInProcHomeTerm DisplayString read-only The SNMP agent’s home
terminal name.
zagInProcMaxOpeners Integer read-only The maximum number of
subagents the SNMP agent can
simultaneously support.
zagInProcCurrentOpeners Integer read-only The current number of
subagents communicating with
the SNMP agent.
zagInEndpointTable Row Objects
zagInEpRowStatus Integer read-write The object used to create or
delete zagInEndpointTable
entries.
zagInEpName Integer read-only The name of the endpoint.
*
Table row objects for zagInProfileTable are accessible to managers that communicate with the
SNMP agent through the IPC interface. These objects are defined as “not-accessible” for SNMP
requests received through TCP/IP’s UDP transport protocol.