SNMP Configuration and Management Manual

MIBs Supported by the SNMP Agent
SNMP Configuration and Management Manual—424777-006
3-21
SNMP Manager Access to Private MIB Objects
zagInEpState Integer read-only The operational state of the
endpoint.
zagInEpHostAddr DisplayString read-write The local host IP address the
agent is to monitor for incoming
messages.
zagInEpNetwork DisplayString read-write The name of the TCP/IP
process the agent must use to
establish the socket session.
zagInProfileTable Row Objects
*
zagInPfRowStatus Integer read-write The object used to create or
delete zagInProfileTable entries.
zagInPfName DisplayString read-only The name of the authentication
table entry.
zagInPfState Integer read-only The operational state of the
authentication table entry.
zagInPfHostAddr DisplayString read-write The Internet address of the
manager whose security is
being defined in the
authentication table entry.
zagInPfCommunity DisplayString read-write A data string compared with the
community string of requests
received through TCP/IP for the
purpose of accepting or
rejecting the request.
zagInPfAccess Integer read-write The authority of the community
members to retrieve and alter
network management
information.
zagInTrapdestTable Row Objects
zagInTdRowStatus Integer read-write The object used to create or
delete zagInTrapdestTable
entries.
zagInTdName DisplayString read-only The name of the trap
destination.
zagInTdState Integer read-only The operational state of the trap
destination.
zagInTdHostAddr DisplayString read-write The address of the host which is
to receive trap messages.
Table 3-4. Access Status of SNMP Agent’s Private MIB Objects (page 2 of 3)
Object Name
Object
Syntax
Manager
Access Description
*
Table row objects for zagInProfileTable are accessible to managers that communicate with the
SNMP agent through the IPC interface. These objects are defined as “not-accessible” for SNMP
requests received through TCP/IP’s UDP transport protocol.