SNMP Configuration and Management Manual

MIBs Supported by the SNMP Agent
SNMP Configuration and Management Manual—424777-006
3-29
Default Values for Table Row Objects
Default Values for Table Row Objects
Table 3-8 lists the default values for zagInEndpointTable and zagInTrapdestTable row
objects.
Table 3-9 identifies the final values for zagInEpRowStatus, zagInTdRowStatus, and
zagInPfRowStatus if you initially set them to createAndGo or createAndWait when:
•
All row objects are defined.
•
Some row objects are undefined.
Activating Table Row Entries
You can activate an entry when it has one of the following RowStatus values:
•
notInService (2). Set the value of the RowStatus object to active (1).
•
notReady (3). Provide a value for any table row objects that have none and then
set the value of the RowStatus object to active (1).
Table 3-8. ENDPOINT and TRAPDEST Default Values
Table Row Object
Attribute
zagInEndpointTable
Default Value
zagInTrapdestTable
Default Value
zagInProfileTable
Default Value
NAME none; a name must be
supplied by an
authorized SNMP
management
application.
none; a name must
be supplied by an
authorized SNMP
management
application.
none; a name must
be supplied by an
authorized SNMP
management
application.
STATE
1
DEFINED DEFINED DEFINED
HostAddr 0.0.0.0 none provided 0.0.0.0
Network $ZTC0 $ZTC0 N/A
Community N/A Tandem public
Access N/A N/A READ-ONLY
Type N/A BROADCAST N/A
Port N/A 162 N/A
RowStatus See Table 3-9
.See Table 3-9.See Table 3-9.
1
For row creation only. For other operations, there is no default value.
Table 3-9. RowStatus Values With Defined and Undefined Row Objects
RowStatus Value All Row Objects Defined Some Row Objects Undefined
createAndGo (4) active (1) Operation rejected
createAndWait (5) notInService (2) notReady (3)