SNMP Configuration and Management Manual

MIBs Supported by the SNMP Agent
SNMP Configuration and Management Manual—424777-006
3-32
Authentication Table Entries
Table 3-11 gives the SNMP agent’s private MIB objects that describe the SNMP
operations environment.
Table 3-10. Initial Values of Objects in the SNMP Agent's MIB
MIB Object Initial Value
System group objects:
sysDescr
NonStop Kernel System
Version: Dxx
Node: node-name
Agent: agent-process-name
where Dxx is the product version of the SNMP agent; for
example, D23.
sysObjectID 1.3.6.1.4.1.169.3.155.1
sysContact
"unknown"
sysName A name associated with the default TCP/IP process handling
communication between the SNMP agent and SNMP
managers. It is derived by a gethostname socket call against
the TCP/IP process specified in the
TCPIP^PROCESS^NAME startup parameter or, if none is
specified, against $ZTC0 on the local node.
sysLocation
"unknown"
sysServices 79
SNMP group object:
snmpEnableAuthenTraps 1 (yes)
Table 3-11. SNMP Agent Private MIB Objects That Describe the SNMP
Operations Environment (page 1 of 4)
SNMP Agent Private
MIB Object
What the Object Defines and Its
Default Value
Equivalent SCF
Construct
zagInEndpointTable Contains all of the TCP/IP
request/response connection point
definitions.
All of the ENDPOINT
objects currently
defined.
zagInEndpointEntry Each row in the zagInEndpointTable
represents one request/response
connection definition.
ENDPOINT object.
zagInEpRowStatus The value of this object is the means
by which request/response connection
definitions are created and removed,
and also the means by which their
availability for use by the SNMP agent
is controlled.
See Table 3-4
on
page 3-20.