SNMP Configuration and Management Manual

MIBs Supported by the SNMP Agent
SNMP Configuration and Management Manual—424777-006
3-33
Authentication Table Entries
zagInEpName A name that serves as an index into
the table, uniquely identifying the table
row containing the request/response
connection definition.
#endpoint-name
zagInEpState The operational state of the
request/response connection
definition.
Reflects result of issuing
SCF ADD, START,
STOP/ABORT
commands as returned
by a STATUS command.
See Table 3-4
on
page 3-20.
zagInEpHostAddr The local host address the agent is to
monitor for incoming messages. The
default is “0.0.0.0”.
HOSTADDR attribute.
zagInEpNetwork The TCP/IP process that handles
request/response messages. The
default is the value specified in the
TCPIP^PROCESS^NAME startup
parameter or, if none is specified,
$ZTC0 on the local node.
NETWORK attribute.
zagInTrapdestTable Contains all of the trap destination
definitions.
All of the TRAPDEST
objects currently
defined.
zagInTrapdestEntry Each row in the zagInTrapdestTable
represents a trap destination definition.
TRAPDEST object.
zagInTdRowStatus The value of this object is the means
by which trap destination definitions
are created and removed, and also the
means by which their availability for
use by the SNMP agent is controlled.
See Table 3-4
on
page 3-20.
zagInTdName A name that serves as an index into
the table, uniquely identifying the table
row defining the trap destination.
#trapdest-name
zagInTdState The operational state of the trap
destination definition.
Reflects result of issuing
SCF ADD, START,
STOP/ABORT
commands as returned
by a STATUS command.
See Table 3-4
on
page 3-20.
Table 3-11. SNMP Agent Private MIB Objects That Describe the SNMP
Operations Environment (page 2 of 4)
SNMP Agent Private
MIB Object
What the Object Defines and Its
Default Value
Equivalent SCF
Construct