SNMP Configuration and Management Manual

SCF Commands for the SNMP Agent
SNMP Configuration and Management Manual—424777-006
5-30
STATUS PROFILE Command
Considerations: STATUS PROCESS
The NonStop agent process is always reported as being in the STARTED state. If the
NonStop agent process has been stopped, the following message returns when you
issue a STATUS PROCESS command: Expecting an existing SCF supported object
name
Example: STATUS PROCESS
The following example displays the operational states for all objects defined for
NonStop agent process $ZSNMP:
12-> STATUS PROCESS $ZSNMP, SUB ALL
SNMP Status PROCESS $ZSNMP
Name Status Trace Trace file
$ZSNMP STARTED OFF N/A
SNMP Status PROFILE
Name State
$ZSNMP.#DEFAULT STARTED
SNMP Status ENDPOINT
Name State
$ZSNMP.#DEFAULT STOPPED
$ZSNMP.#END1 STARTED
SNMP Status TRAPDEST
Name State
$ZSNMP.#REMOTE DEFINED
$ZSNMP.#TRAP0 STARTED
$ZSNMP.#TRAP1 STOPPED
STATUS PROFILE Command
Use the STATUS PROFILE command to display the operational state of an
authentication table entry.
[$agent-process.]#profile-name
identifies the authentication table entry whose operational state you want to
display.
STATUS PROFILE [$agent-process.]#profile-name