SNMP Configuration and Management Manual

SNMP Agent PTrace Facility
SNMP Configuration and Management Manual—424777-006
6-11
SELECT Command
CURRENT
selects the currently defined trace-selection options.
number
is an integer that specifies an enumerated value corresponding to a specific
keyword.
number can be specified in decimal, octal, hexadecimal, or binary notation. When
you specify number, it is saved as an enumerated value. The formats and ranges
follow:
decimal: 0 - 32767
octal: %0 - %77777
hexadecimal: %H0 - %H7FFF
binary: %B0 - %B111111111111111
keyword
is one of the keywords listed in Table 6-2.
Consideration: PTrace SELECT Command
If the SELECT command is not entered, or if the SELECT command is specified with
no keywords, ALL is assumed.
Examples: PTrace SELECT Command
1. The following command sequence positions the record pointer at record 1 and
changes the detail to off to display header information only:
?RECORD 0
Trace of: \NOVA.$ZSNMP, Type (31,30).
Ptrace Data File: $DATA5.SNMT101.ZZSMPTRP
Trace started: 11/19/97 11:27:50.33
First trace entry: 11/19/97 11:27:50.63
Last trace entry: 11/19/97 11:27:53.76
Trace file is in extended format.
Trace entry size limit: 0
?DETAIL off
Ptrace Detail Format: OFF
Table 6-2. Keywords for NonStop SNMP Agent PTrace SELECT Command
Keyword Value Meaning
METHOD 1 Enables the tracing of the trace records written by the
NonStop agent only
COMMON 254 Enables the tracing of the trace records written by the
Common Kernel only