SNMP Configuration and Management Manual
TCP/IP Subagent
SNMP Configuration and Management Manual—424777-006
8-21
ZTSA MIB Objects
Table 8-3 defines each object in the ztsa subtree.
Table 8-3. Private (ZTSA) MIB Objects Supported by the TCP/IP 
Subagent (page 1 of 7)
Object and Attributes Definition Format and Derivation of Value
ztsaAgentName
 1.3.6.1.4.1.169.3.202.1
 read-only
 DisplayString 
 (SIZE (0..31))
The name of the SNMP 
agent process with which 
the TCP/IP Subagent is 
communicating. 
\node.$agent-process  specified 
for the -a startup parameter. If 
none specified, $ZSNMP on the 
local node.
ztsaAgentState*
 1.3.6.1.4.1.169.3.202.2
 read-only
 INTEGER
The status of the 
interface between the 
TCP/IP Subagent and 
the SNMP agent.
A value of connected (1) is always 
returned in a response message 
to a management request, 
indicating that the TCP/IP 
Subagent is communicating with 
the SNMP agent.
ztsaProcessName
 1.3.6.1.4.1.169.3.202.3
 read-only
 DisplayString 
 (SIZE (0..49))
The fully qualified 
NonStop Kernel process 
name of this subagent.
\node.$process:seq-no 
identifying the process name 
specified for the TACL NAME 
option when the TCP/IP Subagent 
was started, and the sequence 
number assigned to the process 
by the NonStop Kernel.
ztsaProcessVersion
 1.3.6.1.4.1.169.3.202.4
 read-only
 DisplayString 
 (SIZE (0..255))
The version of the 
TCP/IP Subagent 
process object file.
T7862Dnn_date --
HP SNMP TCP/IP Subagent, 
where Dnn is the product version 
of the TCP/IP Subagent; for 
example, D20.
ztsaProgramFile
 1.3.6.1.4.1.169.3.202.5
 read-only
 DisplayString 
 (SIZE (0..32))
The name of the TCP/IP 
Subagent program file.
\node.$vol.subvol.filename 
returned by a Guardian 
PROCESS_GETINFO_ 
procedure call.
ztsaProcessPriority
 1.3.6.1.4.1.169.3.202.6
 read-only
 INTEGER (0..199)
The priority of the 
TCP/IP Subagent 
process.
Initially determined by the 
NonStop Kernel or from a TACL 
run option.  After startup, the 
value can be set by an SNMP 
manager.
ztsaProcessGroupID
 1.3.6.1.4.1.169.3.202.7
 read-only
 INTEGER (0..255)
The group number of the 
user who started the 
TCP/IP Subagent.
group-ID-number 
 returned 
by a Guardian 
PROCESS_GETINFO procedure 
call.
* See State Object/Resource Object Pairs on page 8-28 for information about TCP/IP Subagent objects that 
control or indicate the internal processing state of processes used by the subagent.










