SNMP Configuration and Management Manual

TCP/IP Subagent
SNMP Configuration and Management Manual—424777-006
8-31
MIB Objects
ifOutErrors (20) √
ifOutQLen (21) √
ifOutSpecific (22)
MIB Objects
Table 8-5 describes how the TCP/IP Subagent supports objects in the MIB-II Interfaces
group that have HP instrumentation.
Table 8-5. Interfaces Group Objects Supported by TCP/IP Subagent (page 1 of 7)
Object and
Attributes Definition Format and Derivation of Value
ifNumber
1.3.6.1.2.1.2.1
read-only
INTEGER
The number of
network interfaces of
the TCP/IP resources
managed or used by
the subagent since
the subagent was
started. Corresponds
to the number of
supported interfaces
comprising the
ifTable.
Integer with maximum value 32,767
returned from a SPI INFO command on
SUBNET ztsaTcpIpProcess.*
ifTable Objects: Entries describing the
interfaces of the
TCP/IP resources
being managed.
Refer to ifTable Maintenance
on page 8-38
for information on how entries are created
and updated.
ifIndex
1.3.6.1.2.1.2.2.1.1
read-only
INTEGER
Index number for
each network
interface listed in the
ifTable.
Integer ranging from 1 to value of ifNumber,
computed by subagent.