SNMP Configuration and Management Manual

TCP/IP Subagent
SNMP Configuration and Management Manual—424777-006
8-56
TCP Group
TCP Group
The TCP group contains information about the Transmission Control Protocol (TCP)
layer of the TCP/IP subsystem being managed.
The TCP group consists of a collection of scalar objects and one table (tcpConnTable).
The objects identified by a check mark in the following list are objects for which there is
corresponding HP TCP/IP subsystem instrumentation:
iso (1)
identified-organization (3)
dod (6)
internet (1)
mgmt (2)
mib-II (1)
tcp (6) √
tcpRtoAlgorithm (1) √
tcpRtoMin (2) √
tcpRtoMax (3) √
tcpMaxConn (4) √
tcpActiveOpens (5) √
tcpPassiveOpens (6) √
tcpAttemptFails (7)
tcpEstabResets (8)
tcpCurrEstab (9) √
tcpInSegs (10) √
tcpOutSegs (11) √
icmpOutTimeExcds Yes See Table 8-9.
icmpOutParmProbs Yes See Table 8-9
.
icmpOutSrcQuenchs Yes See Table 8-9
.
icmpOutRedirects Yes See Table 8-9
.
icmpOutEchos Yes See Table 8-9
.
icmpOutEchoReps Yes See Table 8-9
.
icmpOutTimestamps Yes See Table 8-9
.
icmpOutTimestampRep
s
Yes See Table 8-9
.
icmpOutAddrMasks Partial No corresponding HP instrumentation exists; 0 is
returned.
icmpOutAddrMaskReps Partial No corresponding HP instrumentation exists; 0 is
returned.
Table 8-10. Compliance With ICMP Group Definitions in RFC 1213 (page2of2)
Object Descriptor
Complianc
e Explanation