SNMP Configuration and Management Manual

TCP/IP Subagent
SNMP Configuration and Management Manual—424777-006
8-65
EMS Support
Table 8-16. TCP/IP Subagent Event Messages (page 1 of 3)
Number ZTSA-EVT- Standard Event and Description
1001 SUBAGENT-AVAIL Object Available
The TCP/IP Subagent primary process has
been initialized. This event is generated at
initial startup and whenever a takeover by the
backup occurs.
1002 SUBAGENT-UNAVAIL Object Unavailable
The TCP/IP Subagent process is terminating
for reasons other than an internal fault or
invalid startup configuration.
1003 AGENT-OBJ-AVAIL Object Available
The interface to the SNMP agent configured
for SNMP messaging has transitioned into the
“connected” state.
1004 AGENT-OBJ-UNAVAIL Object Unavailable
The interface to the SNMP agent configured
for SNMP messaging has transitioned into the
“disconnected” state.
1005 BACKUP-OBJ-AVAIL Object Available
The backup process has transitioned into the
“connected” state.
1006 BACKUP-OBJ-UNAVAIL Object Unavailable
The backup process has transitioned into the
“disconnected” state.
1007 EMSCOLL-AVAIL Object Available
The EMS collector process has transitioned
into the “connected” state.
1008 EMSCOLL-UNAVAIL Object Unavailable
The EMS collector process has transitioned
into the “disconnected” state.
1009 TCPIP-OBJ-AVAIL Object Available
The interface to the TCP/IP resource being
monitored has transitioned into a “connected”
state.
1010 TCPIP-OBJ-UNAVAIL Object Unavailable
The interface to the TCP/IP resource being
monitored has transitioned into a
“disconnected” state.