SNMP Configuration and Management Manual

TCP/IP Subagent
SNMP Configuration and Management Manual—424777-006
8-70
Event Message Descriptions
Event Message Descriptions
ZTSA event messages are described in order by event number. Each description
includes the following:
•
Token lists. Tokens listed as “unconditional” always appear in the event message.
Tokens listed as “conditional” are included only under described conditions.
Tokens not defined by ZTSA are listed only if they contain information that appears
in the printed message text or if they contain ZTSA-defined values.
•
Event message text. The event message text illustrates what is generated when
the contents of the event message are displayed according to the message
template defined in the file ZTSATMPL.
<n> shows where text appears that is derived from a token in the token list.
For a complete specification of the message, examine the message template
source file STSATMPL. The message templates for standard formatted messages
are defined in the EMS Manual.
•
Descriptions of listed tokens or values.
•
The cause of the event, the conditions that prompted the TCP/IP Subagent to
generate the event message.
•
The effects associated with or resulting from the cause.
•
Recovery procedures you can follow to solve the problem reported by the event
message.
•
An example of the formatted message.
1001: ZTSA-EVT-SUBAGENT-AVAIL
The TCP/IP Subagent process has completed process initialization after initial startup
or after a takeover by the backup process.
Unconditional Tokens
ZEMS-TKN-SUBJECT-MARK
ZTSA-TKN-SUBAGENT
ZEMS-TKN-EVENTNUMBER
ZEMS-TKN-CHANGE-REASON
ZEMS-TKN-STATE-PREVIOUS
ZEMS-TKN-STATE-CURRENT
ZEMS-TKN-CONTENT-USER
Value
<1> ZTSA-TKN-SUBAGENT
<2> ztsaProcessName
<3> ZTSA-EVT-SUBAGENT-OBJ-AVAIL
<4> ZEMS-VAL-reason
<5> ZTSA-VAL-STATE-DISCONNECTED
<6> ZTSA-VAL-STATE-CONNECTED
<7> ZEMS-VAL-NULL
Conditional Tokens
None